FUJITA SHORT RAM AIR INTAKE HONDA CIVIC SI 2002-05

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum with an aluminum plenum, eliminating resonators, air box, drop in filter, and replacing it with an open filter element. These key differences allow the vehicle to bring in more air into the intake chamber and create more horsepower and torque. Vacuum and in some cases air mass sensors, are still maintained and incorporated into the Fujita Short Ram Intake. Since a vehicle is constantly moving (except during traffic or at a light) heat soak will be of little issue since the car will constantly be bringing in fresh air. In addition, studies have shown that the material used to build the intake system has shown no loss of horsepower due to an intake being rubber, aluminum, ceramic coated, anodized, etc.

LIST PRICE: $188.00
DISCOUNT PRICE: $168.00

FUJITA SHORT RAM AIR INTAKE INFINITI G37 2008+

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum with an aluminum plenum, eliminating resonators, air box, drop in filter, and replacing it with an open filter element. These key differences allow the vehicle to bring in more air into the intake chamber and create more horsepower and torque. Vacuum and in some cases air mass sensors, are still maintained and incorporated into the Fujita Short Ram Intake. Since a vehicle is constantly moving (except during traffic or at a light) heat soak will be of little issue since the car will constantly be bringing in fresh air. In addition, studies have shown that the material used to build the intake system has shown no loss of horsepower due to an intake being rubber, aluminum, ceramic coated, anodized, etc.

LIST PRICE: $390.00
DISCOUNT PRICE: $333.00

FUJITA SHORT RAM AIR INTAKE HONDA S2000 06+

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum with an aluminum plenum, eliminating resonators, air box, drop in filter, and replacing it with an open filter element. These key differences allow the vehicle to bring in more air into the intake chamber and create more horsepower and torque. Vacuum and in some cases air mass sensors, are still maintained and incorporated into the Fujita Short Ram Intake. Since a vehicle is constantly moving (except during traffic or at a light) heat soak will be of little issue since the car will constantly be bringing in fresh air. In addition, studies have shown that the material used to build the intake system has shown no loss of horsepower due to an intake being rubber, aluminum, ceramic coated, anodized, etc.

LIST PRICE: $278.00
DISCOUNT PRICE: $258.00

FUJITA SHORT RAM AIR INTAKE HONDA CIVIC SI 06+

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum with an aluminum plenum, eliminating resonators, air box, drop in filter, and replacing it with an open filter element. These key differences allow the vehicle to bring in more air into the intake chamber and create more horsepower and torque. Vacuum and in some cases air mass sensors, are still maintained and incorporated into the Fujita Short Ram Intake. Since a vehicle is constantly moving (except during traffic or at a light) heat soak will be of little issue since the car will constantly be bringing in fresh air. In addition, studies have shown that the material used to build the intake system has shown no loss of horsepower due to an intake being rubber, aluminum, ceramic coated, anodized, etc.

LIST PRICE: $233.00
DISCOUNT PRICE: $220.00

FUJITA SHORT RAM AIR INTAKE 2002-2006 ACURA RSX

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include repla

LIST PRICE: $208.00
DISCOUNT PRICE: $178.00

FUJITA SHORT RAM AIR INTAKE ACURA NSX 1991-2001

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include repla

LIST PRICE: $208.00
DISCOUNT PRICE: $178.00

FUJITA SHORT RAM AIR INTAKE 2006-2007 DODGE CHARGER

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include repla

LIST PRICE: $308.00
DISCOUNT PRICE: $263.00

FUJITA SHORT RAM AIR INTAKE LEXUS IS350 06+

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include repla

LIST PRICE: $218.00
DISCOUNT PRICE: $186.00

FUJITA SHORT RAM AIR INTAKE 2002-2005 NISSAN SENTRA

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include repla

LIST PRICE: $288.00
DISCOUNT PRICE: $246.00

FUJITA SHORT RAM AIR INTAKE TOYOTA COROLLA 2005-2007

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include repla

LIST PRICE: $310.00
DISCOUNT PRICE: $265.00

Apex Power Intake Mitsubishi Evo 8/9

The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any “dead spots” within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is trouble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost.

LIST PRICE: $150.00
DISCOUNT PRICE: $145.00

APEXi Power Intake 03-06 Nissan 350Z

The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any “dead spots” within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is trouble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost.

LIST PRICE: $119.00
DISCOUNT PRICE: $95.00

HKS Racing Suction Reloaded Kit 03-06 Nissan 350Z

HKS Racing Suction Reloaded Kits have been developed as the leading intake system for high performance applications. Each kit features aluminum suction pipes that have been tested for optimal air flow. Included in each kit is HKS' Reloaded filter with its patented Super-Funnel and new technical advances: - Filter cage allows for 30% more intake surface area - Aluminum back plate for added strength - Sealing ring reduces contaminants from entering engine - Dual Density wet filter element Inlet/Element Size: 80mm/200mm

LIST PRICE: $450.00

AEM Cold Air Intake 00-03 Honda S2000 2.0L

The lightest, strongest strut bar you can buy! Race-inspired design is the lightest, strongest strut bar available! Virtually eliminates body flex for improved handling and drivability Mounts directly to strut tower with no modifications required Manufactured from ultra-light 6AI-4V aerospace titanium with titanium mounting pads TIG-welded fittings and mounting pads ensure lasting durability

LIST PRICE: $405.00

AEM Cold Air Intake 03-06 Nissan 350Z

A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Outperforms every other Cold Air system on the market Manufactured and assembled in the USA 50-state legal or pending legality Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow Reinforced TIG-welded brackets and fittings deliver added durability Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil! Comprehensive installation instructions, decals and license plate frame included Available powder-coated in red, blue or silver, or with a mirror-polished finish Guaranteed for life

LIST PRICE: $410.00
DISCOUNT PRICE: $369.00

AEM Cold Air Intake 04-05 Honda S2000 2.2L

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Outperforms every other Cold Air system on the market Manufactured and assembled in the USA 50-state legal or pending legality Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow Reinforced TIG-welded brackets and fittings deliver added durability Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil! Comprehensive installation instructions, decals and license plate frame included Available powdercoated in red, blue or silver, or with a mirror-polished finish Guaranteed for life

LIST PRICE: $416.00

Fujita Short Ram Intake 2007 Nissan 350Z DUAL

The 2007 350Z VQ35HR with 306 HP Dual Intake System is Fujita's latest release. Comes with two dual intake pipes that bolt on directly to the throttle bodies, two Super Flow High Performance Filters, silicone hose, Fujita T-Bolt Clamps, and all necessary hardware for a simple, bolt on setup.

LIST PRICE: $360.00
DISCOUNT PRICE: $324.00

Fujita Cold Air Intake 00-05 Honda S2000

A Cold Air Intake is traditionally longer and in most cases extended behind the bumper cover so that it can ingest direct air that is both cooler and denser. In addition to more direct air, the longer plenum achieves higher torque gains as well as impressive horsepower figures. Depending on the complexity of the plenum route, the Fujita Cold Air Intake may come as a 1 piece or 2 piece intake system. Different diameters, filters, and bends are all key factors of the R&D process of each Cold Air Intake. The in-house Dynojet is the final judge of which intake configuration will make it to production. Air/Fuel ratios are also an important factor in testing the Cold Air Intake, ensuring that safe and near factory levels are maintained in order to not trip any electronic sensors on the vehicle. EACH FUJITA INTAKE SYSTEM COMES COMPLETE WITH: 6061 T6 Aluminum Intake Tubing with Polished finish *except special editions HoseTechniques Silicone hose w/Nomex Carbon Plated T-bolt clamps *unless linear clamps are required Fujita Super Flow High Performance Air Filter TIG Welded bracketry Vibration Mounts Free Fujita Hat w/ Included Mail In Rebate Free NOS Energy Drink courtesy of drinknos.com *NOTE: Key features may vary depending on application.

LIST PRICE: $278.00

Fujita Cold Air Intake 06-07 Honda S2000

A Cold Air Intake is traditionally longer and in most cases extended behind the bumper cover so that it can ingest direct air that is both cooler and denser. In addition to more direct air, the longer plenum achieves higher torque gains as well as impressive horsepower figures. Depending on the complexity of the plenum route, the Fujita Cold Air Intake may come as a 1 piece or 2 piece intake system. Different diameters, filters, and bends are all key factors of the R&D process of each Cold Air Intake. The in-house Dynojet is the final judge of which intake configuration will make it to production. Air/Fuel ratios are also an important factor in testing the Cold Air Intake, ensuring that safe and near factory levels are maintained in order to not trip any electronic sensors on the vehicle. EACH FUJITA INTAKE SYSTEM COMES COMPLETE WITH: 6061 T6 Aluminum Intake Tubing with Polished finish *except special editions HoseTechniques Silicone hose w/Nomex Carbon Plated T-bolt clamps *unless linear clamps are required Fujita Super Flow High Performance Air Filter TIG Welded bracketry Vibration Mounts Free Fujita Hat w/ Included Mail In Rebate Free NOS Energy Drink courtesy of drinknos.com *NOTE: Key features may vary depending on application.

LIST PRICE: $278.00

Cusco Blue Intake Pipe Kit 03-06 Mitsubishi Lancer

Available only for the Mitsubishi Lancer Evolution, this air intake pipe kit offers a smooth, steady flow of the intake air. The funnel increases the air efficiency as it flows from the intake pipe to the turbo. The 80mm diameter pipe is painted Cusco blue and bolts on using normal hand tools. K&N air filter sold seperately must be fitted and used with this kit.

LIST PRICE: $361.00

Fujita Short Ram Intake 03-05 Mitsubishi Lancer EVO

Each Fujita Intake System Comes Complete With: 6061 T6 Aluminum intake tubing with polished finish *except special editions HoseTechniques silicone hose w/ nomex Carbon plated T-bolt clamps *unless linear clamps are required Fujita super flow high performance air filter TIG welded bracketry Vibration mounts Fujita duffel bag Fujita hat Note: Key features may vary depending on application

LIST PRICE: $528.00
DISCOUNT PRICE: $475.00

APEXi Power Intake 02-06 Subaru Impreza WRX/STi

The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any “dead spots” within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is trouble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. CONCEPT: Air filter with minimal air-flow restriction CHARACTERISTICS: Dual funnel filter system minimizes intake turbulence

LIST PRICE: $150.00
DISCOUNT PRICE: $120.00

APEXi Aluminum Induction Box 02-06 Subaru Impreza WRX/STi

The A'PEX Aluminum Induction Box effectively shields the intake filter element from power robbing heat caused by turbocharged engines and extreme under the hood conditions. By fully enclosing the filter element and directing the intake air charge away from the heat soaked engine components, the A'PEX induction box helps prevent the ingestion of hot, preheated air from within the engine compartment. This reduction of intake air temperature promotes more efficient combustion, which in turn creates better performance and increased reliability. All components are manufactured by A'PEX to the highest standards to ensure precise fitment and maximum performance.

LIST PRICE: $179.00

Fujita Short Ram Intake 02-06 Subaru Impreza WRX

Each Fujita Intake System Comes Complete With: 6061 T6 Aluminum intake tubing with polished finish *except special editions HoseTechniques silicone hose w/ nomex Carbon plated T-bolt clamps *unless linear clamps are required Fujita super flow high performance air filter TIG welded bracketry Vibration mounts Fujita duffel bag Fujita hat Note: Key features may vary depending on application

LIST PRICE: $288.00
DISCOUNT PRICE: $258.00

GReddy Airinx Kit 02-05 Subaru Impreza WRX

Airinx Air Intake Kits, are complete vehicle specific systems. They are broken down into two main types. One is a simple to install Airinx combination with a one-piece molded internal funnel and pipe or airflow meter adapter. The second type adds smooth flowing mandrel-bent aluminum piping to improve air flow response, and in some case relocation of the air filter for better performance. Also available, kits for GReddy Supercharger Kits. NOTE: AY-M , Intake adapter

LIST PRICE: $168.00

K&N 69 Series Typhoon Air Intake 02-06 Subaru Impr

Designed for increased performance for your sport compacts, utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow, Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty

LIST PRICE: $387.00

Fujita Super Flow High Performace Air Filter 2.75

Fujita’s Super Flow High Performance Air Filter?was designed to maximize efficiency without compromising filtration. The high gloss Fujita air horn enables air to enter the intake chamber in a high velocity spiral motion. The base of the filter was technically engineered to ensure a smooth and rapid passage of the air into the intake chamber. Cleaning the air filter is simple and can be done using any aftermarket filter cleaning kit offered in today’s market.

LIST PRICE: $45.00

Fujita Short Ram Intake 02-04 Acura RSX Base

Each Fujita Intake System Comes Complete With: 6061 T6 Aluminum intake tubing with polished finish *except special editions HoseTechniques silicone hose w/ nomex Carbon plated T-bolt clamps *unless linear clamps are required Fujita super flow high performance air filter TIG welded bracketry Vibration mounts Fujita duffel bag Fujita hat Note: Key features may vary depending on application

LIST PRICE: $208.00

Fujita Short Ram Intake 02-04 Acura RSX Type-S

Each Fujita Intake System Comes Complete With: 6061 T6 Aluminum intake tubing with polished finish *except special editions HoseTechniques silicone hose w/ nomex Carbon plated T-bolt clamps *unless linear clamps are required Fujita super flow high performance air filter TIG welded bracketry Vibration mounts Fujita duffel bag Fujita hat Note: Key features may vary depending on application

LIST PRICE: $228.00

Fujita Cold Air Intake 02-07 Acura RSX Type-S

Each Fujita Intake System Comes Complete With: 6061 T6 Aluminum intake tubing with polished finish *except special editions HoseTechniques silicone hose w/ nomex Carbon plated T-bolt clamps *unless linear clamps are required Fujita super flow high performance air filter TIG welded bracketry Vibration mounts Fujita duffel bag Fujita hat Note: Key features may vary depending on application

LIST PRICE: $258.00

K&N 69 Series Typhoon Air Intake 02-06 Acura RSX

Designed for increased performance for your sport compacts, utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow, Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty

LIST PRICE: $241.00

K&N 69 Series Typhoon Air Intake 02-06 Acura RSX TYPE S

Designed for increased performance for your sport compacts, utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow, Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty

LIST PRICE: $242.00

Injen Cold Air Intake 03-06 Infiniti G35 Sedan

The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty.

LIST PRICE: $370.00

Injen Cold Air Intake 03-06 Infiniti G35 AT/MT Coupe

These Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The SP series does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. SP is The World's First Tuned Intake System.

LIST PRICE: $380.00

Fujita Short Ram Intake 03-06 Infiniti G35/Nissan 350Z w/ Rectangular Air Mass

Each Fujita Intake System Comes Complete With: 6061 T6 Aluminum intake tubing with polished finish *except special editions HoseTechniques silicone hose w/ nomex Carbon plated T-bolt clamps *unless linear clamps are required Fujita super flow high performance air filter TIG welded bracketry Vibration mounts Fujita duffel bag Fujita hat Note: Key features may vary depending on application, w/ Rectangular Air Mass

LIST PRICE: $268.00

HKS Racing Suction Reloaded Kit 03-06 Infiniti G35/03-06 Nissan 350Z

LIST PRICE: $0.00

Fujita Short Ram Intake 06+ Honda Civic EX/DX/LX

Fujita Air Intake Systems utilize aerospace quality mandrel bent 6061-T6 aluminum alloy tubing on all intake pipes and CNC-machined aluminum for adapters and flanges. Fujita Air Super Flow air filters are designed for performance and durability. Unique to the Fujita Air Intake Systems is the use of industrial-grade T-bolt clamps for securing the silicone hoses between the intake tube and intake adaptor--the same stuff used for securing the pressure pipes on high-powered turbocharged motors. On certain applications, Fujita Air has incorporated another unique feature into their intake system and that is the use of a built-in vortex generator to increase low and midrange power. All Fujita Air Intake Systems features a high-polished show-quality finish (except for special editions). Every intake has dyno-proven results. EACH FUJITA INTAKE SYSTEM COMES COMPLETE WITH: 6061 T6 Aluminum Intake Tubing with Polished finish HoseTechniques Silicone hose w/Nomex Carbon Plated T-bolt clamps *unless linear clamps are required Fujita Super Flow High Performance Air Filter TIG Welded bracketry Vibration Mounts

LIST PRICE: $205.00

AEM Cold Air Intake 06+ Civic EX/LX/DX

Every AEM air induction system is individually tuned in length and diameter, and features the highest standards of construction we even guarantee them for the life of your vehicle. Features: Every system is C.A.R.B. exempt, or pending C.A.R.B. exemption (50-state legal) Utilize a complete hardware kit with soft mounts for a guaranteed perfect fit One-piece, four-layer, cotton-gauze AEM air filter eases installation and features an exclusive air horn design that improves performance Comprehensive installation instructions, AEM decals and license plate frame included Manufactured and assembled in the USA Limited lifetime warranty

LIST PRICE: $265.00

Fujita Cold Air Intake 06+ Civic EX/LX/DX

Fujita Air Intake Systems utilize aerospace quality mandrel bent 6061-T6 aluminum alloy tubing on all intake pipes and CNC-machined aluminum for adapters and flanges. Fujita Air Super Flow air filters are designed for performance and durability. Unique to the Fujita Air Intake Systems is the use of industrial-grade T-bolt clamps for securing the silicone hoses between the intake tube and intake adaptor--the same stuff used for securing the pressure pipes on high-powered turbocharged motors. On certain applications, Fujita Air has incorporated another unique feature into their intake system and that is the use of a built-in vortex generator to increase low and midrange power. All Fujita Air Intake Systems features a high-polished show-quality finish (except for special editions). Every intake has dyno-proven results. EACH FUJITA INTAKE SYSTEM COMES COMPLETE WITH: 6061 T6 Aluminum Intake Tubing with Polished finish HoseTechniques Silicone hose w/Nomex Carbon Plated T-bolt clamps *unless linear clamps are required Fujita Super Flow High Performance Air Filter TIG Welded bracketry Vibration Mounts

LIST PRICE: $255.00

INJEN COLD AIR INTAKE for INFINITI G37

Cold Air Intake for G37. Dyno Proven at 14+whp. Replacement Reservior for winshield washer included.

LIST PRICE: $725.00
DISCOUNT PRICE: $551.00

HKS Super Hybrid Filter 2008 + G37

The High Performance Super Air Filters are a direct replacement for stock OE panel filters. They feature a bonded element (using the same high flow polyurethane material as the Super Mega Flow) to a flexible nylon net to protect against intake air pulses, which can diminish filtration ability. The HP Super Air Filters offer an economic alternative to full air intakes with easy "slide in" installation.

LIST PRICE: $70.00
DISCOUNT PRICE: $59.00

HKS Super Hybrid Filter 2009 370Z

The High Performance Super Air Filters are a direct replacement for stock OE panel filters. They feature a bonded element (using the same high flow polyurethane material as the Super Mega Flow) to a flexible nylon net to protect against intake air pulses, which can diminish filtration ability. The HP Super Air Filters offer an economic alternative to full air intakes with easy "slide in" installation.

LIST PRICE: $70.00
DISCOUNT PRICE: $60.00

INJEN SHORT RAM INTAKE for INFINITI G37

MR TECHNOLOGY, DUAL DRY FILTER WITH HEATSHIELD, INJEN DYNO POSTED 12WHP, 7TQ. Pretty Impressive. MYG37 FORUM MEMBERS CONTACT ME. INTRODUCTORY PRICE STILL APPLY

LIST PRICE: $475.00
DISCOUNT PRICE: $404.00

TAKEDA SHORT RAM INTAKE for NISSAN 370Z

ProDRY Oil-Free Synthetic Filters Takeda Air Intake Systems use a revolutionary new Pro Dry S Filter Media that works without filter oil. This media is easier and faster to clean than traditional foam, and requires no costly and messy solvents or oils. Takeda filters can be cleaned in a matter of minutes and are ready to use after only a couple of hours of drying time. Unlike pre-oiled or disposable filters, Takeda Filters are Lifetime Filters that will last as long as you own your vehicle.

LIST PRICE: $366.00
DISCOUNT PRICE: $330.00

INJEN COLD AIR INTAKE FOR NISSAN 370Z POLISHED

Injen SP1989P Dual Cold Air Intakes Nissan 370Z Z34 Injen's newest intake for the Nissan 370Z netting 15 Wheel Horsepower and 11Ft. Lbs of torque. FORUM MEMBERS PLEASE CALL FOR SPECIAL PRICING

LIST PRICE: $725.00
DISCOUNT PRICE: $550.00

STILLEN Generation 3 Ultra Long Tube Dual Intake Kit for INFINITI G37

STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has lead to the introduction of our new Generation 3 Ultra Long Tube Intake. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicle’s. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 20 horsepower gain at the wheels on the Dual Throttle Body 350Z, 18.5 horsepower gain at the wheels on the G37 Coupe and 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! For G37/G35 Sedan owners, gains are 14 horsepower at the wheels. No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support. Installation time is estimated at two hours for an experienced technician. No other part relocation or parts removal is required.

LIST PRICE: $549.00

AFE POWER Direct Fit Nissan 370Z 2009 Infiniti G37 08-09 V6-3.7L

Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will out flow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly space pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

LIST PRICE: $61.00
DISCOUNT PRICE: $45.00

Takeda Intakes Infiniti G35 03-06 V6-3.5L

The Takeda Retain Intake is a short ram air intake system. In recent testing this intake produced 13hp and 15lbs. x ft. of torque on a 2004 Coupe w/automatic transmission. This unique intake design utilizes the front of the stock air box to ensure colder air intake temperature to the filter. Takeda also completed additional testing on cold air intake systems both developed in-house as well as other competitors in the market and found that the cold air intake systems were producing much higher intake temperatures. This was due to insufficient fresh-air flowing through the lower portion of the bumper and trapping the unwanted heat coming from the engine. Takeda intakes are constructed out of lightweight clear coat anodized tubing for maximum air flow and a great style. Each intake uses a large 360 degree high flow PRO Dry S air filter for maximum flow, filtration and convenience. The PRO Dry S air filter requires no oils and cleans with simple soap and water. This Takeda intake comes complete with all tubing, filters, couplers, 3-angle adaptor, wrinkle black air box cover, and hardware for an easy installation.

LIST PRICE: $349.00
DISCOUNT PRICE: $275.00