GTSPEC Front Subframe Tie Brace (L+R) 07+ G35/G37

DESCRIPTION:
GTSPEC front subframe tie brace for 07+ G35 and G37. Adding two extra braces (left and right) from the subframe to the chassis of the body. A similar brace exist on G35 (X) AWD. Direct bolt on, not modification required. NOTE: WILL NOT FIT G35 (X) AWD.

TANABE SPRINGS NF210 INFINITI G37 08+ - TNF130

The NF210 coil spring features a tasteful drop, and produces the best overall ride quality and comfort for a performance lowering spring. The lowered stance of the NF210 gives the car an elegant pose, while the spring rates, which are only slightly raised (up to 5% over stock) retain factory ride quality settings.The NF210 coil spring features a tasteful drop, and produces the best overall ride quality and comfort for a performance lowering spring. The lowered stance of the NF210 gives the car an elegant pose, while the spring rates, which are only slightly raised

$247.00

FUJITA SHORT RAM AIR INTAKE INFINITI G37 2008+ - SR-2206

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum with an aluminum plenum, eliminating resonators, air box, drop in filter, and replacing it with an open filter element. These key differences allow the vehicle to bring in more air into the intake chamber and create more horsepower and torque. Vacuum and in some cases air mass sensors, are still maintained and incorporated into the Fujita Short Ram Intake. Since a vehicle is constantly moving (except during traffic or at a light) heat soak will be of little issue since the car will constantly be bringing in fresh air. In addition, studies have shown that the material used to build the intake system has shown no loss of horsepower due to an intake being rubber, aluminum, ceramic coated, anodized, etc.

$333.00

Tanabe Medalion Touring G37 Exhaust 08 - T70132A

A refined level of performance and driveability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING acheives extremely high levels of exhaust system efficiency, while maintaining a street driveable, extremely low frequency and deep tone that is well under 93db for discreet sports driving. This system requires no removeable silencer for under 93db operation at all rpms. The extremely deep, low frequency tone keeps in-cabin noise to a minimum. The full SUS304 stainless MEDALION TOURING features a slim-line oval canister, and a special dual wall, angle-cut tip. This premium quality system is for sports driving.

$846.00

Greddy Racing Ti-C Dual Exhaust: Infiniti G37 08+ - 10127907

GReddy Racing Ti-C Cat-back Exhausts combine the design, looks and flow of our Full Racing Titanium systems with the durability, deep sound, value and large application list of our other Stainless Steel street systems. This fusion of aggressive styling and practical construction, makes this the logical choice for both Race and Street Enthusiasts. The systems are comprised of a Titanium heat-treated tip, polished stainless steel muffler, unpolished stainless steel piping. It improves high and mid-range performance while still allowing for suitable sound levels when used with the included tuned Tri-mounted Silencer*. *Most applications below 92db, with all under 94db. The large list of applications include 80mm piping for Turbo applications and 50-60-70mm for Normally Aspirated vehicles. (usually 60mm) To compliment the GReddy Turbo Kit line, we also offer the Turbo Ti-C line. Turbo Ti-C cat-back exhaust systems feature larger piping diameters for more flow then the standard normally aspirated Racing Ti-C applications. (usually 70 or 80mm)

$841.00

INJEN COLD AIR INTAKE for INFINITI G37 - SP1997

Cold Air Intake for G37. Dyno Proven at 14+whp. Replacement Reservior for winshield washer included.

$551.00

KW Variant 3 Coilovers for Infiniti G37 - 35286003

KW coilover kit Variant 3 for Infinity G 37 KW Variant 3 coilover kit for Coupe G37 is now available.These KW coilover suspensions lower the vehicle 0.8-1.8 inches on the front axle and 0.2-1.8 inch on the rear axle. Part no.; 35286003 Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up.

$2,100.00

JP USA LIP KIT for Infiniti G37 - JP G37 PU

Made with OEM quality Super Polyurethane. NOTES: Full kit includes front under spoiler and sport side mud guards L&R. **Pictures shown with Infiniti OEM rear mud guards on G37 S model** Hardware is included with all of our products. For products that required double-sided tape, industrial grade double-sided tape comes pre-installed.

$649.00

Volk Racing RE30 Limited Edition - RE30LE19FS

Volk RE30 Forged 1 Piece Wheel light weight. Amplified Motorsport carries RE30 Wheels in 17 inch and 18 and 19 inch. They are available in Bronze or Chrome Silver. If you need a certain application for your vehicle, please call us at (323)881-0882 or email us at sales@amplifiedmotorsport.com

$920.00

Eibach Pro kit Springs for Infiniti G37 08 - 6388.140

The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It´s our legendary spring system that dramatically improves both a vehicle´s performance and appearance. Pro-Kit lowers your car´s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs. Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level

$239.00

JIC-MAGIC COILOVERS for INFINITI G37 - CKV36FLTA2

Special Pricing for MYG37.COM members The JIC FLT-TAR is the flagship coilover system. All FLT-TAR coilovers are designed on US-spec vehicles for US streets, fitment and performance is unmatched. Included in the kits are pillow ball upper mounts with adjustable camber plates. For flexibility, the dampers have 15-way compression and rebound adjustability. The spring rates are of the linear-rate type with independent ride height adjustable lower brackets. This allows adjustment without compromising damper compression or rebound travel. Based off of racing technology, the FLT-TAR is a street performance suspension, customizable for full time track use. NOTE: some applications may come with a rubber bushing upper mount. A Pillow Ball upper mount may be substituted for additional cost and with no warranty. Please contact us for applications and details.

$2,199.00

BLITZ THROTTLE CONTROLLER for Infiniti G37 - 10402

Electronic device that improves acceleration. 4 setting ECO, SP1, SP2, SP3. Monitor clearly displays selected mode while in use. Vehicle specific plug and play includes all necessary harness.

$350.00

SPC REAR CAMBER KIT FOR INFINITI G37 - 72260 72265

The 72260 Adjustable Rear Arm for the 2008 G37 offer maximum adjustment for camber and toe. This is the perfect kit to adjust rear angle for optimum handling and to maximize tire life, adjusts camber+/-4.0 degrees and toe +/- 3.0 degrees. Use the 85125 rotary files to elongate the OE toe slots. Rear Adjustment range: Camber ±4.00 degree Toe ±3.00 degree Installation time: .6 hr/side Required: 1 kit per wheel Applications 72050 Nissan: 2002 & Up 350Z Infiniti: 2003 - 07 G35 Coupe, 2003 - 06 G35 Sedan 72260 Infiniti: 2007 & Up G35 Sedan, G37 COUPE Recommended Tools: 85125 - Rotary File Set

$219.00

HKS HI POWER EXHAUST FOR INFINITI G37 - 32009-BN003

INFINITI G37 2008 ; Coupe Only / Full Dual Polished SUS304 Stainless Steel Piping w/Dual Titanium Tips (adjustable length) Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. Part No: 32009-BN003 Tip: HP-Ti Tip Dia. (mm): 120 Piping Dia. (mm): 60

$2,036.00

INVIDIA Infiniti G37 Coupe 2007-Up Cat-Back fully polished - HS07IG7GT3

FORUM MEMBERS SPECIAL PRICE APPLIES. PLEASE CONTACT US PRIOR TO ORDERING FULLY POLISHED STAINLESS STEEL 304, FULL CAT BACK WITH X PIPE. TITANIUM ADJUSTABLE TIPS WILL BE AVAILABLE SOON.

$935.00

FAST INTENTIONS HIGH FLOW CAT POLISHED - FIHFC

These are 300 Cell Metallic catalytic converters. 2.50" O.D. polished. If you want the non polished HFC, they are $30 cheaper, please specify under notes when you order

$530.00

COBB ACCESS PORT FOR INIFINITI G37 - APG37

COBB Tuning announces the immediate availability of the AccessPORT for the 2008 Infiniti G37. The AccessPORT is the first hand-held device available for the Infiniti G37 that performs an ECU reflash through the vehicle's OBDII port. Just plug it in, load the map and go! Faster! The AccessPORT provides owners of 2008 Infiniti G37 vehicles the ability to unlock power hidden within the factory ECU. Performance gains across the entire powerband can be quickly realized in the short time it takes to flash the vehicle's ECU with the AccessPORT. No tools are required. No mailing the factory ECU across the country. No vehicle downtime. No waiting. And waiting. And waiting! Just plug the AccessPORT in, flash the ECU and enjoy the thrill of increased torque and horsepower! But don't put the AccessPORT away just yet. Flashing the ECU is just the start of what the AccessPORT is capable of. Set the AccessPORT to Performance mode to capture 0-60MPH times and ¼ Mile times. Switch over to Live Data and choose a gauge to monitor, such as; coolant temperature, oil temperature, throttle position, intake cam advance, Air/Fuel voltage and many more. Use the Troubleshooting mode to diagnose issues across multiple electronic control systems (ECU, TCM, IPDM, MA Meter, BCM, Auto Drive Position, Pre-Crash Seatbelt System, Adaptive Lights and Air Bag System) by reading the factory codes and resetting the system once the issues have been resolved. But don't put the AccessPORT away just yet. Flashing the ECU is just the start of what the AccessPORT is capable of. Set the AccessPORT to Performance mode to capture 0-60MPH times and ¼ Mile times. Switch over to Live Data and choose a gauge to monitor, such as; coolant temperature, oil temperature, throttle position, intake cam advance, Air/Fuel voltage and many more. Use the Troubleshooting mode to diagnose issues across multiple electronic control systems (ECU, TCM, IPDM, MA Meter, BCM, Auto Drive Position, Pre-Crash Seatbelt System, Adaptive Lights and Air Bag System) by reading the factory codes and resetting the system once the issues have been resolved. Real life will eventually intrude and require that the G37 be left behind. Eliminate separation anxiety and protect your investment when out on the town by quickly loading the Valet map to prevent the engine from revving above 3,200 rpm. When it's time to put the G37 away for the evening, simply load the Anti-Theft map to make it impossible to start. And in the event the car must be returned to the stock configuration, the AccessPORT can be completely removed and the ECU restored to its factory condition. The AccessPORT will continue to meet future needs as well. Firmware upgrades will include the ability to record datalogs, monitor fuel economy and simulate a dynamometer. Upcoming software releases will enable our Professional Tuner network to custom tune any modification configuration to extract the maximum performance from each unique vehicle. The AccessPORT from COBB Tuning is the most comprehensive hand-held ECU flashing, monitoring and managing device available for the Infiniti G37.

$475.00

PROJECT MU NS STREET FRONT BRAKE PADS for INFINITI - PSF210

STREET BRAKE PAD Project Mu NS street pads are developed specifically for street use. Guaranteed to outperform OEM pads, Project Mu NS street pads are reliable in any weather or road conditions. NS street pads give outstanding initial stopping power that is of prime importance on the street. Made from an Asbestos-free brake compound, NS street pads also have very minimal dust and very low squeal properties. Applicable Rotor Temp: 0~400 deg. Celsius Friction Coefficient: 0.37~0.40 Late model Japanese cars Front and Rear pads available Available for Brembo, AP, and Alcon brake calipers WILL WORK ONLY WITH G37 SPORT BRAKES

$124.00

PROJECT MU NS STREET REAR BRAKE PADS for INFINITI - PSR210

STREET BRAKE PAD Project Mu NS street pads are developed specifically for street use. Guaranteed to outperform OEM pads, Project Mu NS street pads are reliable in any weather or road conditions. NS street pads give outstanding initial stopping power that is of prime importance on the street. Made from an Asbestos-free brake compound, NS street pads also have very minimal dust and very low squeal properties. Applicable Rotor Temp: 0~400 deg. Celsius Friction Coefficient: 0.37~0.40 Late model Japanese cars Front and Rear pads available Available for Brembo, AP, and Alcon brake calipers

$114.00

Hotchkis Front and Rear Sway Bar Kit: 08 Infiniti G37 - 22441

SPECS FOR NON S Front Sway Bar 35mm (Ø1-3/8") Hollow Hole 1 = 230% Stiffer than Stock Rear Sway Bar 27mm (Ø1.063") Hollow Hole 1 = 120% Stiffer than Stock Hole 2 = 175% Stiffer than Stock Hole 3 = 250% Stiffer than Stock SPECS FOR S Front Sway Bar 35mm (Ø1-3/8") Hollow Hole 1 = 205% Stiffer than Stock Rear Sway Bar 27mm (Ø1.063") Hollow Hole 1 = 5% Stiffer than Stock Hole 2 = 30% Stiffer than Stock Hole 3 = 65% Stiffer than Stock

$369.00

Ichiba Stainless Steel Y-Pipe: 08+ Infiniti G37 - ichibaG37

100% T-304 Stainless steel with polish finished 2.5" Inlet & 3" Outlet, Fits All Catback Exhaust Tuned for all-out performance for Racing applications only NOT C.A.R.B. exempt CAD-rendered design eases installation CNC Machined Flanges with Mandrel bent tubing High Performance Y-Pipe Increase Around 6-8 HP & Torque Direct bolt-on with all installation accessories Gain a deeper more aggressive sound Each product comes with one year warranty Perfect compliment to customers that have GReddy or Tanabe exhaust

$269.00

HKS Super Hybrid Filter 2008 + G37 - 70017-AN004

The High Performance Super Air Filters are a direct replacement for stock OE panel filters. They feature a bonded element (using the same high flow polyurethane material as the Super Mega Flow) to a flexible nylon net to protect against intake air pulses, which can diminish filtration ability. The HP Super Air Filters offer an economic alternative to full air intakes with easy "slide in" installation.

$63.00

ICHIBA CAMBER ARMS, REAR for INFINITI G37 - NS-20021R

Introducing the Ichiba front and rear adjustable camber arms for your 350Z and G35. Ichiba front and rear adjustable camber arms are direct replacements and allow you to adjust camber on the front and the rear of your G37. These arms uses a special compound rubber bushing to ensure smooth operation and minimize noise. No more premature tire wear on your expensive set of wheels! And better handling too!

$129.00

SUSTEC PRO S-OC for INFINITI G37/G35 07 - TSC130

SUSTEC PRO S-0C is for those who desire both high performance and maximum comfort from a suspension system. S-0C is ideal for performance or street applications. Dispelling a popular belief that a firm or harsh ride is a sign of a performance suspension, the short stroke, shortened case dampener of the S-0C is extremely unique in that it’s internal construction allows it to deliver superior handling without sacrificing strength or ride comfort. Unique double-cylinder design allows for full suspension stroke within the shortened shock body while Low-pressure gasses ensure smooth rebound characteristics for additional ride comfort. For all driving enthusiasts. SPRING RATE 10K FRONT 9K REAR DROP: -1/2~-3 1/8in / -1/8~-1 1/2 FREE SHIPPING TILL THE END OF THE MONTH

$941.00

GTSPEC Front Strut Brace for 07 up G35 Sedan and G37 - GTS-SUS-1320

Aluminum Type-D front strut brace for 2007+ G35 Sedan/ G37 Coupe. Polish center shaft with laser cut print. Forged 7075 end points for added rigidity.

$209.00

GTSPEC Front Subframe Tie Brace (L+R) 07+ G35/G37 - GTS-SUS-1332

GTSPEC front subframe tie brace for 07+ G35 and G37. Adding two extra braces (left and right) from the subframe to the chassis of the body. A similar brace exist on G35 (X) AWD. Direct bolt on, not modification required. NOTE: WILL NOT FIT G35 (X) AWD.

$143.00

STATUS ELITE DRY CARBON RADIATOR SHROUD FOR INFINITI G37 - SEDCRS

Every carbon fiber product we produce is “Dry Carbon.” We utilize the highest quality materials and manufacturing process available in the industry. Our manufacturing process is similar to those of aerospace, aviation, military, motorsports, and Formula 1. Every composite part starts with the mold and is the most expensive part of producing a product. A quality mold reflects high quality part. At Status Elite we hand craft our molds with high grade epoxy and carbon fiber. “Dry Carbon” the name has nothing to do with the look and finish of the piece, but it has everything to do with how it’s made. “Dry Carbon” (aka Pre-Preg) is Carbon Fiber pre-impregnated with frozen resin. We utilize a special type of high grade epoxy in our pre-impregnated fibers so that the resin can provide continuous service about 350 degrees. Once vacuumed pressure and heat is induced the resin flows evenly providing the same consistency for every piece. At Status Elite we vacuum bag and AUTOCLAVE every part we produce. The advantage of autoclaving is the constant high pressure and high temp cure which enables the part to achieve high durability and strength. Under applied pressure the “Dry Carbon” (aka Pre-Preg) is able to fuse tightly together. Applied pressure allows excess resin to be removed, which translates to light weight.

$319.00

STATUS ELITE DRY CARBON BATTERY AND BRAKE COVER FOR INFINITI G37/G35 07 - SEDCBBC

Every carbon fiber product we produce is “Dry Carbon.” We utilize the highest quality materials and manufacturing process available in the industry. Our manufacturing process is similar to those of aerospace, aviation, military, motorsports, and Formula 1. Every composite part starts with the mold and is the most expensive part of producing a product. A quality mold reflects high quality part. At Status Elite we hand craft our molds with high grade epoxy and carbon fiber. “Dry Carbon” the name has nothing to do with the look and finish of the piece, but it has everything to do with how it’s made. “Dry Carbon” (aka Pre-Preg) is Carbon Fiber pre-impregnated with frozen resin. We utilize a special type of high grade epoxy in our pre-impregnated fibers so that the resin can provide continuous service about 350 degrees. Once vacuumed pressure and heat is induced the resin flows evenly providing the same consistency for every piece. At Status Elite we vacuum bag and AUTOCLAVE every part we produce. The advantage of autoclaving is the constant high pressure and high temp cure which enables the part to achieve high durability and strength. Under applied pressure the “Dry Carbon” (aka Pre-Preg) is able to fuse tightly together. Applied pressure allows excess resin to be removed, which translates to light weight.

$220.00

BREMBO 6 PISTON FRONT CALIPER FOR INFINITI G37 - 1N0.8001A

6 PISTON MONOBLOCK CALIPERS(REPLACE OEM 4 POT CALIPERS) GOODRIDGE STAINLESS STEEL BRAIDED LINES BRACKETS FERODO FM1000 BRAKE PAD ( GREAT STREET / AUTOCROSS PADS ) ALL OTHER NECESSARY HARDWARE BLEADER TUBE INSTRUCTION MANUAL

$1,990.00

STATUS ELITE DRY CARBON ENGINE COVER for INFINITI G37 and G35 SEDAN 07 UP - SEDCENG

factory replacement Dry Carbon engine cover. Very high quality. Every carbon fiber product we produce is “Dry Carbon.” We utilize the highest quality materials and manufacturing process available in the industry. Our manufacturing process is similar to those of aerospace, aviation, military, motorsports, and Formula 1.

$419.00

INJEN SHORT RAM INTAKE for INFINITI G37 - SP1998P

MR TECHNOLOGY, DUAL DRY FILTER WITH HEATSHIELD, INJEN DYNO POSTED 12WHP, 7TQ. Pretty Impressive. MYG37 FORUM MEMBERS CONTACT ME. INTRODUCTORY PRICE STILL APPLY

$404.00

STATUS ELITE DRY CARBON DIFFUSER for INFINITI G37 - SEDCD

Rear Diffuser made out high quality DRY CARBON. Every carbon fiber product we produce is “Dry Carbon.” We utilize the highest quality materials and manufacturing process available in the industry. Our manufacturing process is similar to those of aerospace, aviation, military, motorsports, and Formula 1.

$619.00

ROTORA CROSS DRILLED AND SLOTTED ROTOR G37 SPORT REAR SET - R42101.2C

From its official acceptance into the domestic race scenes to D1 Grand Prix USA Drifting competitions, Rotora today proves to be a key supporter and a supplier of high performance brake components in the aftermarket industry, offering total-quality race products to reassure the confidence in the Rotora brand. Today, the company continues to manufacture a wide variety of the latest applications in high performance rotors, calipers, pads, and complete brake upgrade systems for the Domestic, Import, and European vehicles as well as producing dry carbon fiber racing components in which explores the latest technology of high pressure/high temperature ?dry carbon? fiber process

$318.00

ROTORA CROSS DRILLED AND SLOTTED ROTOR G37 SPORT FRONT SET - R42100.2C

From its official acceptance into the domestic race scenes to D1 Grand Prix USA Drifting competitions, Rotora today proves to be a key supporter and a supplier of high performance brake components in the aftermarket industry, offering total-quality race products to reassure the confidence in the Rotora brand. Today, the company continues to manufacture a wide variety of the latest applications in high performance rotors, calipers, pads, and complete brake upgrade systems for the Domestic, Import, and European vehicles as well as producing dry carbon fiber racing components in which explores the latest technology of high pressure/high temperature ?dry carbon? fiber process

$381.00

GREDDY SPECTRUM ELITE FOR INFINITI G37 - 10127961

Spectrum Elite - SE Today’s sophisticated tuners want it all, and GReddy’s SE exhaust systems deliver the full spectrum of features desired in a street performance system. SE exhausts increase flow via tuned piping and larger, free-flowing mufflers for improved power, but provide discreet sound levels that won’t attract the wrong kind of attention. The exhaust note is comfortable and sporty, not loud. Each application is tested and tuned for USA spec. vehicles, so fitment and sound is confirmed. All SE Exhaust are test to be well below the 95dBA standard. Our new smaller Spectrum exhaust tip(s) help disguise the system from the rear of the vehicle, but reveal show-quality appearance from the side and underneath. Whether you are cruising down the road or at wide-open throttle down the track, the Spectrum Elite is ready. Refined sound. Hard-hitting power. Superb looks. Excellent fitment. GReddy quality. - A true Sports Exhaust. 70MM SINGLE PIPE: DUAL 105MM BURNT TIPS FORUM MEMBERS PLEASE CONTACT US FOR SPECIAL PRICING

$1,152.00

GTSPEC Rear Lower Tie Brace For 350Z/G35/G37 - GTS-SUS-1087

GTSPEC rear lower tie brace for the Nissan 350Z and Infinity G35. Increase your subframe rigidity. Constructed of air craft grade 6061 aluminum with triple internal wall for maximum rigidity. Note: Also clear 07+ G35 Sedan and G37 ***WILL NOT WORK WITH VEHICLES OPTIONED WITH REAR ACTIVE STEERING***

$90.00

MXP EXHAUST for INFINITI G37 COUPE - MXPG37AMP

New From MXP, a true dual exhaust system with Y PIPE and Burnt tips. High grade 304 stainless steel including flanges. Top notch quality welds, Beautiful setup with minimal bends and so far the best sounding exhaust made for the INFINITI G37. free shipping within the continental states. ALASKA, HAWAII and overseas countries please contact us for additional shipping Forum members please call us for introductory pricing!!!

$1,385.00

AIT RACING CARBON ROOF SPOILER for INFINITI G37 - AITCFROOFG37

Famous Honeycomb carbon fiber process from AIT RACING, this carbon roof spoiler not only gives it a more agressive but yet refined look but its also a functional piece for down force Forum members contact us for special pricing

$259.00

INVIDIA GEMINI EXHAUST TRUE DUAL TITANIUM ADJUSTABLE TIPS for INFINITI G37 - HS07IG7GIT

NEW DESIGN TRUE DUAL FULL CATBACK EXHAUST FROM INVIDIA FOR THE INFINITI G37/G37S. 304 STAINLESS STEEL FULLY POLISHED WITH ADJUSTABLE SINGLE WALLED, DUAL ROLLED WALLED TITANIUM, OR STAINLESS STEEL TIPS TIPS. NEW X PIPE DESIGN FOR BETTER BACK PRESSURE AND TORQUE. 60MM PIPPING FORUM MEMBERS PLEASE CALL US FOR SPECIAL PRICING. PLEASE SPECIFY UNDER NOTES WHICH TIPS WHEN ORDERING

$937.00

SAMCO RADIATOR KIT for INFINITI G37 BLACK - TSC403CBLK

4 HOSE KIT. SamcoSport hose kits are specifically designed to directly replace your Original Equipment hoses. These premium quality, hand crafted, high performance silicone hoses work to greater levels of temperature & pressure - which is essential when you’re upgrading your engine’s performance. On top of this, SamcoSport hoses further enhance the look of your engine bay over standard organic rubber hoses, as kits are available in any one of the 9 standard SamcoSport colors. FORUM MEMBERS CALL US FOR BEST PRICING

$159.00

SAMCO RADIATOR KIT for INFINITI G37 Blue - TSC403CBLU

4 HOSE KIT. SamcoSport hose kits are specifically designed to directly replace your Original Equipment hoses. These premium quality, hand crafted, high performance silicone hoses work to greater levels of temperature & pressure - which is essential when you’re upgrading your engine’s performance. On top of this, SamcoSport hoses further enhance the look of your engine bay over standard organic rubber hoses, as kits are available in any one of the 9 standard SamcoSport colors. FORUM MEMBERS CALL US FOR BEST PRICING

$159.00

SAMCO RADIATOR KIT for INFINITI G37 RED - TSC403CRED

4 HOSE KIT. SamcoSport hose kits are specifically designed to directly replace your Original Equipment hoses. These premium quality, hand crafted, high performance silicone hoses work to greater levels of temperature & pressure - which is essential when you’re upgrading your engine’s performance. On top of this, SamcoSport hoses further enhance the look of your engine bay over standard organic rubber hoses, as kits are available in any one of the 9 standard SamcoSport colors. FORUM MEMBERS CALL US FOR BEST PRICING

$159.00

AIT RACING CARBON FIBER ENGINE COVER FOR INFINITI G37 and G35 07 UP - AITCFECG37

Famous Honeycomb carbon fiber process from AIT RACING, this carbon fiber engine cover gives your engine bay a more classy look. Forum members contact us for special pricing

$199.00

ARK PERFORMANCE G.R.I.P. EXHAUST SYSTEM FOR INFINITI G37 COUPE - SM1101-007D

Burn Tip Dual layer Exhaust Tips SUS304 Stainless Steel Construction Fully Polished Finish 2.5" dual Piping w/ DUAL 4.5" Exhaust Tip CNC Machined Flanges Exposed micro TIG welded Bolts and hardware required for install are included Item included : Axle back muffler , Middle pipe with resonator , X flow Y- pipe

$1,550.00

INVIDIA HIGH FLOW CATALYTIC CONVERTER FOR INFINITI G37 NISSAN 370Z - HS09N7ZTPC

304 STAINLESS STEEL, FULLY POLISHED. 60 MM PIPING WITH FLOW RATING OF 200. 200 CEL. BOLTS AND GASKETS INCLUDED. NON FOULERS AVAILABLE FOR ADDITIONAL $20.00. OFF ROAD USE ONLY. FORUM MEMBERS PLEASE CALL FOR SPECIAL PRICING

$595.00

STILLEN Generation 3 Ultra Long Tube Dual Intake Kit for INFINITI G37 - 402646

STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has lead to the introduction of our new Generation 3 Ultra Long Tube Intake. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicle’s. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 20 horsepower gain at the wheels on the Dual Throttle Body 350Z, 18.5 horsepower gain at the wheels on the G37 Coupe and 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! For G37/G35 Sedan owners, gains are 14 horsepower at the wheels. No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support. Installation time is estimated at two hours for an experienced technician. No other part relocation or parts removal is required.

$549.00

HyperTech Max Energy Sport Power Programmer 08 up Infiniti G37 - 62005-G37

The HyperTech Max Energy Sport Power Programmer for the 2008 and UP Infiniti G37 extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, HyperTech engineers first make hundreds of dyno runs to optimize the spark and air-fuel curves point by point over the entire rpm band from just off idle to wide open throttle. Next they take the vehicle with the new tune to the track and the street to verify real world performance gains. The results…maximum power, quicker acceleration, smoother shifting and better driveability. Features: *Maximum Horsepower & Torque *Improved Fuel Economy *Raise Top Speed Limiter *Raise "RPM" Rev Limiter *Adjust Shift Points & Firmness *Recalibrate Speedometer *Lower Cooling Fan On/Off Temps *Read, Display and Clear DTCs *Internet Updateable (USB included) *50-State Emissions Legal *Easy Plug-And-Play Installation **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping ****

$450.00

TANABE SUSTEC STABLIZER FRONT AND REAR FOR INFINITI G37 - TSB150F

Built for the driving enthusiast, the Sustec Stabilizer emininates roll for exceptional stability and maximum tire contact patch and grip. Unique to the Sustec Stabilizer is it's FULL CHROMEMOLY steel alloy construction. Chromemoly's strength is such that a small diameter chromemoly anti-swaybar is significantly stronger than the standard steel anti-swaybars that are larger in diameter. FRONT 30.4mm REAR 25.4mm FORUM MEMBERS PLEASE PM ME FOR SPECIAL PRICING

$351.00

JDP ENGINEERING CARBON FIBER add on sport spoiler for INFINITI G37 - CFJDPAMP

Exclusive for Amplified Motorsport, Carbon Fiber add on spoiler made only to fit the SPORT spoiler from factory give the G37 COUPE a much need, more aggressive look. Also available in fiberglass. 2x2 twill or can be specially ordered with 1x1

$425.00

EIBACH ANTI-ROLL Single Sway Bar FRONTonly for INFINITI G37 - 6393.310

* Performance Tuned Sway Bars * Improved Handling and Further Reduce Body Roll * Precision Engineered for Pro-Kit & Sportline * Part of the Eibach Pro-System-Plus & Sport-System-Plus * Million Mile Warranty Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While our Pro-Kit and Sportline spring sets are regarded as the primary suspension enhancement components, the Eibach Anti-Roll-Kit allows critical fine-tuning of your car's handling characteristics. Our Anti-Roll-Kit reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation. Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the Anti-Roll-Kit comes complete with all necessary mounting hardware and instructions for easy installation. 32mm front

$189.00

EIBACH ANTI-ROLL Single Sway Bar Kit REAR only for INFINITI G37 - 6393.312

* Performance Tuned Sway Bars * Improved Handling and Further Reduce Body Roll * Precision Engineered for Pro-Kit & Sportline * Part of the Eibach Pro-System-Plus & Sport-System-Plus * Million Mile Warranty Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While our Pro-Kit and Sportline spring sets are regarded as the primary suspension enhancement components, the Eibach Anti-Roll-Kit allows critical fine-tuning of your car's handling characteristics. Our Anti-Roll-Kit reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation. Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the Anti-Roll-Kit comes complete with all necessary mounting hardware and instructions for easy installation. 29mm REAR Will fit the NISSAN 370Z

$189.00

EIBACH Anti Roll kit Front and Rear for INFINITI G37 - 6393.320

Anti-Roll-Kit | Performance Sway bars Step-3: Essential Part Of The Pro-System-Plus & Sport-Sytem-Plus * Performance Tuned Sway Bars * Improved Handling and Further Reduce Body Roll * Precision Engineered for Pro-Kit & Sportline * Part of the Eibach Pro-System-Plus & Sport-System-Plus * Million Mile Warranty Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While our Pro-Kit and Sportline spring sets are regarded as the primary suspension enhancement components, the Eibach Anti-Roll-Kit allows critical fine-tuning of your car's handling characteristics. Our Anti-Roll-Kit reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation. Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the Anti-Roll-Kit comes complete with all necessary mounting hardware and instructions for easy installation.

$345.00

TEIN BASIC DAMPER for INFINITI G37 08 UP - DSP92-LUAS2

TEIN type BASIC damper offers a high quality coilover system at an entry level price. Drivers will feel in increase in stability, and grip, while maintaining good ride quality on the street and freeway. A shortened shell case is utilized to allow for better ride and improved performance at lowered ride heights. BASIC damper is a great option for consumers wanting a simple and quality made coilover. Each application is test fitted and road tested to ensure the best possible balance between comfort and performance on the street. Includes ride height adjustment to give your vehicle a minor to major drop.

$901.00

TEIN SUPER STREET P for INFINITI G37 COUPE OR SEDAN - DSP92-2UAS4

TEIN TEIN Super Street damper kit was designed for drivers seeking improved handling on the street and at the track. A shortened shell case is utilized to allow the most piston stroke possible, which allows for a better ride at lowered ride heights, and increased grip at the track. Great for daily driving and occasion track use, whether it be at the drag strip, local circuit, or Auto-X course. Includes both ride height and 16 levels of damping force adjustment to allow the driver to dial in the suspension for various road conditions. Super Street with Upper mounts adds front and rear upper mounts. The upper mounts increase steering response, and allow for EDFC compatibility. On strut type vehicles, the front upper mounts will include camber adjustment plates.

$1,369.00

TEIN FLEX TYPE for INFINITI G37 COUPE and SEDAN - DSP92-6UAS4

TEIN has used its years of experience in various motor sports to produce a kit that provides the ultimate balance between comfort and performance. Developed for drivers seeking an aggressive coilover that can be used daily, and provide all the adjustments needed for circuit use. The FLEX damper Kit features the latest technology for all drivers who are seeking performance, and adjustability, while not giving up all ride comfort. We have incorporated separate spring perch height, and shell case length adjustment, which allows the suspension to retain more stroke and allows for more suspension tuning. The FLEX damper kit includes pillow ball upper mounts, which increase steering response; 16 levels of damping force adjustment, and is compatible with the EDFC (Electronic Damping Force Controller) for added convenience and adjustability. • Steel Construction • Twin Tube internal construction • Ride Height adjustable via threaded body and spring seats • 16 way adjustable dampers, compression and rebound combined • Pillow ball upper mounts for increased steering feel • Upper camber adjustment on front for strut type vehicles • Larger piston diameter for strut type front and rear (22mm) • EDFC (Electronic Damping Force Controller) compatible • Powder coated brackets with Teflon coated shock body for heavy duty rust prevention • 1-year Manufacturers Defect Warranty

$1,683.00

GTSPEC Front 4 Point Ladder Brace for 370Z G37 07 up G35 Sedan - GTS-SUS-1348

GTSPEC Front 4 Point Ladder Brace for 370Z/G37/ 07+ G35 Sedan. Will not fit G35/G37X.

$197.00

GTSPEC 6 Points Rear Subframe Brace 07+ G35/G37 - GTS-SUS-1350

GTSPEC 08+ G37 6 Points Rear Subframe Reinforcement Brace. 5 pieces kit, consists of a reinforcement plate and two 3 points triangle braces and 2 subframe mounting bracket. Adding reinforcement to the rear subframe by connecting the rear subframe to the chassis.

$359.00

GTSPEC Rear Lower Lateral Reinforcement Brace (M Shape) for 07+ G35/G37 - GTS-SUS-1349

GTSPEC Rear Lateral Tie Brace (M Shape) for 07+ G35/G37. Goes along the same line as the rear sway bar. ONLY fits stock or selective aftermarket exhaust system.

$134.00

TAKEDA COLD AIR INTAKE FOR INFINITI G37 - TA-3016P

Producing gains of 19 horsepower and 12 lbs. x ft. torque, Takeda is proud to have engineered this true cold air intake system for the popular G37. The placement of the unique single air filter in the area in front of the radiator guarantees a supply of cool, high pressure fresh air for maximum power gains. The Takeda philosophy of "no cutting or drilling" is maintained with this intake system, as flexible urethane couplings are used to pass through existing openings in the radiator core support. The polished aluminum tubes are maintenance-free thanks to the clear anodized finish. Whether for street or race, this is the ultimate intake system for the G37.

$399.00

TANABE MID PIPE FOR INFINITI G37 COUPE 08 UP - T50132

Tanabe Mid Pipe upgrade for Infiniti G37 coupe only, will not work for SEDAN models.

$513.00

CUSCO FRONT STRUT BAR FOR INFINITI G37 CPV36 - 288 540 A

FRONT STRUT BAR FOR INFINITI G37 COUPE AND SEDAN, G35 2007 SEDAN. SPECIAL ORDER from Japan, NO REFUND OR RETURNS. All sales final

$190.00

CUSCO TRUNK REAR BRACE FOR INFINITI G37 COUPE ONLY - 288 492 RB

REAR STRUT BRACE FOR INFINITI G37 COUPE 08+ SPECIAL ORDER FROM JAPAN, NO RETURN OR CANCELLATION

$265.00

ARQRAY EXHAUST SYSTEM for INFINITI G37 COUPE 08 UP - 1009TK30

Arqray Performance Exhaust Systems A performance exhaust system offers many benefits to your vehicle’s operation, including reduced back pressure, fuel-mileage improvements, a distinct sound and quality craftsmanship. Arqray, the Japanese performance exhaust manufacturer produces superior performance exhaust systems that improve your vehicle in these key areas. For more than 30 years, Arqray has conducted dyno and road course testing to continually improve upon their high quality systems. Your ride deserves Arqray; fit, quality, tone and aggressive looks are enhanced by a design that is tailored specifically for the make and model of your car. An Exhaust System Constructed the Right Way Quality is the foundation of Arqray’s manufacturing process. From the TIG welded seams to the choice of titanium for weight reduction or SUS304 stainless steel for long-life, Arqray pays careful attention to every detail. With their awareness of improving each system’s flow characteristics, your vehicle will be enhanced by the design, durability and performance characteristics that are the Arqray signature.

$1,574.00

SWIFT SPORT SPRINGS FOR INFINITI G37 COUPE 08 UP - SWINFG37C

Swift made Sport Springs keeps your quality ride you get from showroom, and adds a sporty feel and lower ride height for sport driving enthusiasts and style minded drivers who demand only the best. Swift did not start developing Sport Springs by trying to drop the ride height. Unlike others who only care about style, Swift approached to create lowering springs with 3 rules. 1 Keep or improve a smooth comfortable ride. 2 Increase handling, control, and performance. 3 Lower the vehicle within the each vehicle’s usable stroke.

$449.00