Eibach Pro-Kit Springs 03-07 Nissan 350Z

DESCRIPTION:
Best Combination of Looks, Handling and Ride Quality Lower Center of Gravity-Lowers Vehicle 1.0"- 1.5" Each Kit Specifically Tuned and Tested for Your Vehicle World´s Best Quality, Precision and Corrosion Resistance Formula 1 Technology and Quality for Your Car Million-Mile Warranty

Power Slot Front Rotors 03-06 Nissan 350Z (Brembo) - 564PSL+564PSR

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where Power Slot's slotted brake rotors make a big difference. Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, our Vac-U-Slot helps push water off the braking surface for better stopping power. The Vac-U-Slot also serves as a visual wear indicator. The slot is machined to the rotor’s minimum thickness where it crosses the outside edge. If you cannot see the slot along the outside edge, the rotor has worn down to its discard depth. A combination of Hawk® high performance brake pads and Power Slot slotted rotors will deliver superior, reliable braking for virtually all automotive, truck and SUV applications, even under hard driving and severe duty conditions. But for our most demanding customers such as police pursuit vehicles and club racers, we also suggest Power Slot Cryo rotors.

$325.00

GReddy Aero Side Skirts FRP 03-06 Nissan 350Z (Pai - 17020236

Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler. While driving air turbulence occurs around the front tire, this turbulence can disturb airflow all the way to the back of the vehicle, where it can reduce the function of the rear spoiler. The GRACER Side Skirt is designed to smooth out the air turbulence towards the back of the vehicle, to achieve safe handling of the vehicle. The GRACER Rear Spoiler is not just another cosmetic rear spoiler, in addition to enhancing the appearance of the vehicle it was also designed to be extremely functional. GRACER Aero Kits are designed to give maximum down force and airflow effect to maximum performance form the original body style.

$494.00

GReddy Aero Front Lip Urethane 03-06 Nissan 350Z - 17020231

Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler. While driving air turbulence occurs around the front tire, this turbulence can disturb airflow all the way to the back of the vehicle, where it can reduce the function of the rear spoiler. The GRACER Side Skirt is designed to smooth out the air turbulence towards the back of the vehicle, to achieve safe handling of the vehicle. The GRACER Rear Spoiler is not just another cosmetic rear spoiler, in addition to enhancing the appearance of the vehicle it was also designed to be extremely functional. GRACER Aero Kits are designed to give maximum down force and airflow effect to maximum performance form the original body style.

$220.00

GReddy Aero Rear Lip FRP 03-06 Nissan 350Z - 17020241

Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler. While driving air turbulence occurs around the front tire, this turbulence can disturb airflow all the way to the back of the vehicle, where it can reduce the function of the rear spoiler. The GRACER Side Skirt is designed to smooth out the air turbulence towards the back of the vehicle, to achieve safe handling of the vehicle. The GRACER Rear Spoiler is not just another cosmetic rear spoiler, in addition to enhancing the appearance of the vehicle it was also designed to be extremely functional. GRACER Aero Kits are designed to give maximum down force and airflow effect to maximum performance form the original body style.

$355.00

APEXi Power Intake 03-06 Nissan 350Z - 508-N020

The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any “dead spots” within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is trouble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost.

$95.00

HKS Racing Suction Reloaded Kit 03-06 Nissan 350Z - 70020-BN011

HKS Racing Suction Reloaded Kits have been developed as the leading intake system for high performance applications. Each kit features aluminum suction pipes that have been tested for optimal air flow. Included in each kit is HKS' Reloaded filter with its patented Super-Funnel and new technical advances: - Filter cage allows for 30% more intake surface area - Aluminum back plate for added strength - Sealing ring reduces contaminants from entering engine - Dual Density wet filter element Inlet/Element Size: 80mm/200mm

$499.00

ARC Super Induction Box 03-06 Nissan 350Z - AIDBZ33

Air Intake system

$580.00

AEM Cold Air Intake 03-06 Nissan 350Z - 21-547

A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Outperforms every other Cold Air system on the market Manufactured and assembled in the USA 50-state legal or pending legality Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow Reinforced TIG-welded brackets and fittings deliver added durability Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil! Comprehensive installation instructions, decals and license plate frame included Available powder-coated in red, blue or silver, or with a mirror-polished finish Guaranteed for life

$369.00

Fujita Short Ram Intake 2007 Nissan 350Z DUAL - SR-2835

The 2007 350Z VQ35HR with 306 HP Dual Intake System is Fujita's latest release. Comes with two dual intake pipes that bolt on directly to the throttle bodies, two Super Flow High Performance Filters, silicone hose, Fujita T-Bolt Clamps, and all necessary hardware for a simple, bolt on setup.

$324.00

Tanabe Ultra Medalion Exhaust 03-07 Nissan 350Z - T60063

Taking the benefits of the motorsports engineered SUPER MEDALION RACING one step further, extreme horsepower gains and lightweight is the goal of the Ultra Medalion. Only the highest grade titanium, which is free from impurities, is used on the Ultra Medalion. By using titanium in the main silencer sections, canister, and tip, the Ultra Medalion weighs a mere fraction of OEM exhaust systems. For maximum durability , ultra lightweight thinwall SUS304 stainless steel exhaust pipingwas developed for use with the system. For the enthusiast that is particular on having the absolute best exhaust system available, Ultra Medalion excels in all categories. Pipe Diameter: 70mm Tip Diameter: 100mm

$920.00

Tanabe Ultra Medalion Exhaust 03-07 Nissan 350Z - T60063

Taking the benefits of the motorsports engineered SUPER MEDALION RACING one step further, extreme horsepower gains and lightweight is the goal of the Ultra Medalion. Only the highest grade titanium, which is free from impurities, is used on the Ultra Medalion. By using titanium in the main silencer sections, canister, and tip, the Ultra Medalion weighs a mere fraction of OEM exhaust systems. For maximum durability , ultra lightweight thinwall SUS304 stainless steel exhaust pipingwas developed for use with the system. For the enthusiast that is particular on having the absolute best exhaust system available, Ultra Medalion excels in all categories. Pipe Diameter: 70mm Tip Diameter: 100mm SUBJECT TO AVAILABLITIY

$782.00

Tanabe Medalion Touring Exhaust 03-07 Nissan 350Z - T70063

A refined level of performance and drivability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING achieves extremely high levels of exhaust system efficiency, while maintaining a street drivable, extremely low frequency and deep tone that is well under 93db for discreet sports driving. This system requires no removable silencer for under 93db operation at all RPMs. The extremely deep, low frequency tone keeps in-cabin noise to a minimum. The full SUS304 stainless MEDALION TOURING features a slim-line oval canister, and a special dual wall, angle-cut tip. This premium quality system is for sports driving. Pipe Diameter: 70mm Tip Diameter: 115mm

$980.00

Tomei Expreme Test Pipe 03-06 Nissan 350Z - 193094

The EXPREME Straight Front Pipe is compatible with the original factory exhaust manifold. Not street legal in Japan & in most countries but best value for money and superb performance gain (Eliminates the factory setup of 4 catalyst cells).

$363.00

Tomei Expreme Header 03-06 Nissan 350Z - 193085

The TOMEI Expreme exhaust manifold for the VQ35 has been developed to deliver "absolute power" improvement through its efficiency. With the performance curve on the NA proves that this is the absolute best performance possible from the VQ35. Before thought to be unimaginable, is now available for everyone off the shelf. You will not regret the pure sensational feeling that NA has to offer, an absolutely different dimension from forced induction engines.

$1,045.00

APEXi PSRevo Muffler Exhaust 03-07 Nissan 350Z DUA - 158-N052

Designed for hard tuned, street driven vehicles, the PS Revolution's exhaust pressure activated "active valve" system provides the hardcore enthusiast with the best of both worlds. The retracting valve is engaged and disengaged based upon exhaust gas pressure. This revolutionary new muffler design allows high powered street cars to maintain a tolerable, and legal, exhaust note at idle and light throttle acceleration while completely disengaging during high throttle, high load situations. Never before has an exhaust system seamlessly fused the streetability of a stock exhaust system and the performance of a low restriction racing exhaust. Like all A'PEX exhaust systems, the PS Revolution features a high quality SUS 304 stainless steel muffler. Being the standard for performance and reliability, the PS Revolution uses full stainless steel mandrel bent piping for added strength and minimum weight.

$1,390.00

GReddy GREX Front Brake System 8 Piston 380mm 03-06 Nissan 350Z - 15025651

Backed by extensive research and development, GReddy Brake Systems are designed as full competition-spec. brake kits suitable for street use. Each application-specific GReddy Brake System kit will work with a wide variety of wheels. Lightweight 4 and 6 piston aluminum calipers are designed to be as compact as possible and are stylishly protected by our classic GREX gold hard anodized finish. Large lightweight, motorsport style, two-piece rotors use an anodized, duralumin bell housing to prevent rusting and scratching. The finest quality Earl’s Teflon lined stainless steel braided brake hoses are also included for maximum performance and reliability.

$5,400.00

StopTech Big Brake Kit Rear 03-05 Nissan 350Z (4 P - 83.646.0023

General Benefits of Big Brake Kits Big Brake Kits give your vehicle that Supercar look and feel, and exceed stock performance in two areas. First, larger rotors increase heat capacity. Second, stiffer calipers and stainless steel lines reduce system compliance. The key, however, is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front torque (as many do), you reduce your car's ability to utilize the tractive capacity of all of the tires to the maximum practical extent (even on ABS equipped cars) and you therefore create performance sacrifices. In addition, too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, which limits a driver's control of brake input on the race track.

$2,295.00

GReddy GREX Front Brake System 8 Piston 380mm 03-06 Nissan 350Z - 15025651

Backed by extensive research and development, GReddy Brake Systems are designed as full competition-spec. brake kits suitable for street use. Each application-specific GReddy Brake System kit will work with a wide variety of wheels. Lightweight 4 and 6 piston aluminum calipers are designed to be as compact as possible and are stylishly protected by our classic GREX gold hard anodized finish. Large lightweight, motorsport style, two-piece rotors use an anodized, duralumin bell housing to prevent rusting and scratching. The finest quality Earl’s Teflon lined stainless steel braided brake hoses are also included for maximum performance and reliability.

$5,400.00

Power Slot Front Rotors 03-06 Nissan 350Z (Non-Bre - 562PSL+562PSR

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where Power Slot's slotted brake rotors make a big difference. Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, our Vac-U-Slot helps push water off the braking surface for better stopping power. The Vac-U-Slot also serves as a visual wear indicator. The slot is machined to the rotor’s minimum thickness where it crosses the outside edge. If you cannot see the slot along the outside edge, the rotor has worn down to its discard depth. A combination of Hawk® high performance brake pads and Power Slot slotted rotors will deliver superior, reliable braking for virtually all automotive, truck and SUV applications, even under hard driving and severe duty conditions. But for our most demanding customers such as police pursuit vehicles and club racers, we also suggest Power Slot Cryo rotors.

$337.00

Cusco OS Front Strut Bar 03-07 Nissan 350Z - 251-540-A

The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has already chosen the ideal design for each application. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

$155.00

Cusco Zero-1 Coilover Damper w/ Rubber 03-06 Nissan 350Z - 251-60E-CN

Coilover kit with excellent ride comfort! Easy to set up unit that is fully ride height adjustable that will provide you with an amazing feel. Ride height adjustable coilover kit with pre-set dampening rate. Full ride height adjustable Pre-set rate/Dampening non-adjustable Heavy-duty anti-rust protection Recommended for drivers who: Wish to eliminate bumper steer and under steer. Prefer customizing suspension setting. Want a lower ride height quality at a reasonably priced system. Zero-1 to Zero-2 upgrade: The Zero-1 and Zero-2 suspension kits share the same size shock absorber, thus you can decide to switch your Zero-1 suspension kit over to the fully adjustable unit of the Zero-2 very easily and reasonably. New and improved anti-rust protection! The Zero series units provide stainless steel lock nuts and spring lower seats.

$1,520.00

Cusco Zero-1 Coilover Damper w/ Pillowball 03-06 Nissan 350Z - 251-60E-CP

Coilover kit with excellent ride comfort! Easy to set up unit that is fully ride height adjustable that will provide you with an amazing feel. Ride height adjustable coilover kit with pre-set dampening rate. Full ride height adjustable Pre-set rate/Dampening non-adjustable Heavy-duty anti-rust protection Recommended for drivers who: Wish to eliminate bumper steer and under steer. Prefer customizing suspension setting. Want a lower ride height quality at a reasonably priced system. Zero-1 to Zero-2 upgrade: The Zero-1 and Zero-2 suspension kits share the same size shock absorber, thus you can decide to switch your Zero-1 suspension kit over to the fully adjustable unit of the Zero-2 very easily and reasonably. New and improved anti-rust protection! The Zero series units provide stainless steel lock nuts and spring lower seats.

$1,730.00

Skunk2 Lowering Springs 03-06 Nissan 350Z - 519-07-1920

Skunk2 Lowering Springs are designed to dramatically improve handling performance and driver feel by significantly increasing corner grip and reducing body roll. Skunk2 springs are CNC-wound using the highest quality SAE9254V spring steel, shot peen stress relieved, and corrosion protected using phosphate and powder coatings. Each spring is designed to optimize the balance between performance and comfort. The result is a spring that offers racecar like handling, yet maintains smooth and comfortable ride characteristics. Skunk2 Lowering Springs can be used with factory or aftermarket shock absorbers and look great on vehicles with stock or aftermarket wheels. Average drop is approximately 1.5” - 1.75”. When applicable, we recommend using Skunk2 Lowering Springs with Skunk2 Sport Shocks and other fine Skunk2 suspension components. • CNC-Wound • SAE9254V Spring Steel • Shot Peen Stress Relieved • Corrosion Resistant Powder Coating • 1.5” - 1.75” Average Drop • Excellent Ride Characteristics • Significantly Increases Corner Grip • Use With Stock or Aftermarket Wheels

$216.00

Eibach Pro-Kit Springs 03-07 Nissan 350Z - 6364.140

Best Combination of Looks, Handling and Ride Quality Lower Center of Gravity-Lowers Vehicle 1.0"- 1.5" Each Kit Specifically Tuned and Tested for Your Vehicle World´s Best Quality, Precision and Corrosion Resistance Formula 1 Technology and Quality for Your Car Million-Mile Warranty

$369.00

Eibach Sportline Springs 03-07 Nissan 350Z - 4.6463

Extreme Performance Meets Extreme Style Race-Car Like Handling Lowers Vehicle 1.7" - 2.3" Progressive Spring Design Excellent Ride Quality Part of the Eibach Sport-System Million Mile Warranty

$369.00

Tanabe Sustec Pro S-0C Coilover Damper 03-07 Nissan 350Z - TSC063

SUSTEC PRO S-0C is for those who desire both high performance and maximum comfort from a suspension system. S-0C is ideal for performance or street applications. Dispelling a popular belief that a firm or harsh ride is a sign of a performance suspension, the short stroke, shortened case dampener of the S-0C is extremely unique in that it’s internal construction allows it to deliver superior handling without sacrificing strength or ride comfort. Unique double-cylinder design allows for full suspension stroke within the shortened shock body while Low-pressure gasses ensure smooth rebound characteristics for additional ride comfort. For all driving enthusiasts. Spring Rate (kg/mm): 10/8 *NOTE: ADJUSTABLE REAR SPRING

$1,100.00

Tanabe Sustec Pro FIVE Coilover Damper 03-07 Nissan 350Z - TSE5063

Sustec Pro FIVE is an all new adjustable coilover suspension that features a wide array of all new circuit developed technology that is similar to Tanabe's Sustec Pro SEVENS. Spring Rate (kg/mm): 10/8 Sustec Pro FIVE delivers broad performance for the track to the streets. Featuring 12-way(16-way with TEAS) front & rear adjustment, FIVE allows drivers to fine tune height, dampening and rebound based on street conditions and driver preference. The new slide valve technology allows a great range of adjustability and function for street and track use. When used with the new TEAS electronic active suspension controller, the wide range of dampening force is accessible through the touch of a button, and is fully programmable to automatically adjust dampening rates according to the speed you drive.

$1,590.00

ARC Titanium Front Strut Tower Bar 03-06 Nissan 350Z - ATBTIZ33

ARC TITANIUM STRUT BAR

$568.00

Carbing Front Strut Tower Bar 03-07 Nissan 350Z - CA-641-141-0L-T

The Carbing Tower Bar is a completely welded piece (no pivot points) with a 5mm thick base plate, which makes it truly functionally in reducing chassis flex. It is constructed of A6063S aluminum for superior rigidity and light weight. The built-in brake master cylinder stopper allows the driver increased brake pedal feel which gives the driver greater control. This two in one bar is not only fully functional but is also beautifully crafted.

$315.00

Tanabe GF210 Lowering Springs 03-07 Nissan 350Z - TGF063

The GF210 coil spring is geared towards maximum performance, without compromising daily driveability. A subtle drop provides an aggressive stance, while the higher spring rates (+20% - 30% over stock) provide excellent handling and vehicle stability characteristics. These springs provide a very noticeable gain in performance when installed. The GF210 is well mated with a performance shock upgrade to extract the full potential of the coil spring, but will also work with factory equipment. Each coil spring application is tested for fitment and optimal weight distribution for sportier handling. Drop Rate(F/R): 1.0"/1.2"

$204.00

Cusco Twin Carbon Clutch 03-07 Nissan 350Z - 251-022-TC

For high-powered cars, with durable, sharp response and straight/repeated transmission of power that offers the smoothest engagement. Heat Resistant: Being less affected by the heat, carbon disc does not bend. As for the conventional metal disc bends and looses smooth disengagement. Durability: High performance on less maintenance cost. Carbon disc has a specific friction/temp rate characteristic and also high-heat resistance. This provides the longer wear in better maneuver, compared to other conventional clutches. Fitting: A "Bolt-On Type" offers easy perfect mounting. "Pull Type" does not require any adjuster kits and the "Bolt-On Type" allows easy mounting. *Pull type and push type are used depending on the cars.

$2,464.00

ACT HDSS Clutch Kit 03-04 Nissan 350Z - NZ1-HDSS

This kit includes these components: N-021 - Heavy Duty Pressure Plate NSD140S - Performance Street Disc RB130 - Release Bearing Torque Capacity: 517 ft/lbs.

$748.00

Cusco Type MZ 1.5 Way LSD 03-06 Nissan 350Z - LSD-251-K15

Featuring high tension chrome molybdenum steel housing and gears the Cusco LSD is up for the task of serious competition. With large oil windows for increased flow and Cusco's original groove cut technology for improved efficiency on the clutch plates, stability and longevity is promoted. ----- The 1.5-way Type MZ utilizes cone plates to develop the initial torque and features full engagement during acceleration and partially under deceleration.

$1,019.00

Cusco Type RS 1.5 Way LSD 03-06 Nissan 350Z - LSD-251-L15

Featuring high tension chrome molybdenum steel housing and gears the Cusco LSD is up for the task of serious competition. With large oil windows for increased flow and Cusco's original groove cut technology for improved efficiency on the clutch plates, stability and longevity is promoted. ----- The 1.5-way Type RS utilizes coil springs located between the pressure rings to develop initial torque and features full engagement during acceleration and partially under deceleration. The use of coil springs rather than cone plates help promote faster, smoother engagement, along with higher durability.

$1,182.00

Koyorad 54mm Core Radiator 03-05 Nissan 350Z - R2577

Lightweight high performance radiators provide the key to maximum engine performance. Koyorad's experience in developing superior performance radiator products is proud to present K-Sport performance radiators, off the shelf or custom made.

$593.00

APR Carbon Fiber Radiator Cooling Plate 03-06 Nissan 350Z - CF-350231

The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be. To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay. Features: Dry Carbon Fiber Manufacturing Process ? The APR Radiator Cooling Plates are constructed by high temperature and high pressure dry carbon fiber production process, making them durable and able to withstand elevated engine bay temperatures. Designed for Easy Installation ? The APR Radiator Cooling Plates are designed to factory specifications for easy installation and clean fit and finish. Fade Resistant Epoxy Coating ? To ensure durability, the APR Radiator Cooling Plate uses fade resistant epoxy coating to reduce the effects of high engine bay temperatures.

$125.00

Cusco 35mm Front Sway Bar 03-07 Nissan 350Z - 251-311-AJ35

Cusco’s sway bars are available for most applications on the front or rear of the vehicle. Reducing body roll during hard cornering is not the only feature that can be increased with these. Depending on the particular size and position of the sway bar, oversteer and understeer can be modified. Available in adjustable and non-adjustable with varying diameter sizes, Cusco offers many different options to suit your driving needs. Painted in Cusco blue these bars are direct bolt-on with all the necessary hardware

$340.00

Tanabe Rear Stabilizer Bar 03-06 Infiniti G35 Coupe/Nissan 350Z - TSB063R

Built for the driving enthusiast, the Sustec Stabilizer eliminates roll for exceptional stability and maximum tire contact patch and grip. Unique to the Sustec Stabilizer is it's FULL CHROMEMOLY steel alloy construction. Chromemoly's strength is such that a small diameter chromemoly anti-sway bar is significantly stronger than the standard steel anti-sway bars that are larger in diameter. The Sustec Stabilizer has a carefully calculated OUTER and INNER diameter, for the proper amount of rigidity. The diameter and strength cannot be compared to other commonly available anti-sway bars due to the vast difference in material construction. Chromemoly anti-sway bars have typically only been readily available to race users. The Sustec Stabilizer makes this lightweight, extremely functional race material technology available to all motorsport enthusiasts for a reasonable price! Diameter: 22.0mm

$195.00